Horizontal barrier Injection cream against damp masonry - Cartridges 310 ml (€ 79.97 / 1L)

Product no.: 980

21.00 €
-5%
19.90 €
(1 l = 64.19 €)
incl. VAT, plus delivery
In stock

Description

Highly effective barrier against moisture
 
based on silane-siloxane, solvent-free.
 
Stops rising damp in masonry
 
Ready to use - easy to use!
 
Highly effective barrier against moisture
based on silane-siloxane, solvent-free.
 
Stops rising damp in masonry,
 
especially suitable for bricks, clay and natural stone.
 
Ready to use - easy to use!
 
 
 
Consumption:
 
(depends on the quality of the masonry, porosity, water content)
 
Wall thickness (cm) 20  25 30 40 50
Borehole length  (cm) 18 23 27 37 7
approx. consumption for 1 running meter  * (ml) 186 237 279 382 485
Treated wall length from 1 kg of sealing cream (by the meter) 6 m 4,7m 4 m 2,9 m 2,3 m
 
 * For borehole diameter 12 mm and borehole distances 12 cm
 
 
 
Through wall drying you can save up to 40% heating costs,
 
because the moister the masonry, the worse the heat insulation.
 
 
 
Working principle:
 
The low viscosity creamy solution is introduced into the predrilled holes. The active ingredient is able to spread by diffusion in the pore water of the building material!
 
All horizontal bores are connected together in the masonry and form a compact layer. The hydrophobic (water-repellent) effect prevents water penetration from the floor.
 
The masonry above the cream injection begins to dry out.
 
 
 
Manual:
 
Wall preparation: The loose plaster is removed from the walls and the holes are made horizontally in the joints.
 
The diameter of openings is about 12 mm at a distance of about 10-12 cm and at a depth of the wall thickness minus about 2-5 cm (Figure). Dust is sucked from the openings.
 
Insert the cartridge into a cartridge press.
 
Injection solution is filled into the openings with the aid of "injection nozzles" until no more mass is absorbed.
 
Slowly retract the nozzle. For longer wall you can extend nozzles with hose.
 
Finishing work: Close the drill holes with sealing slurries, mortar.
 
 
 
Efficiency of the system
 
The experience of the injection, in this way are very good. However, it is necessary to note that dehydration of the moisture during injection is a very slow process.
 
 It is noticeable at the earliest after 6 months.
 
Injection is effective only against the rising damp, but not against the water entering the roof, from the eaves or displaced rainwater.
 
 
 
Technical parameters
 
Active ingredient: Octyltriethoxysilane - high concentration of approx. 80% in the product
 
Solvent-free
 
Also suitable for heavy moisture and many cavities.
 
Color white
 
pH value: 8-10
 
 
 
Storage:
 
minute 6 months (+5 to + 40 ° C), protect from frost!
 
 
 
Possible dangers:
GHS07-attention
 
 
ATTENTION!
 
Keep away from children.
 
 
 
REMARKS
 
The Technical Information Sheet describes processing and application possibilities as well as typical modes of action under normal conditions. 

Bulk discount

QuantityPrice per itemDiscount
10 piece(s) or more18.90 €Price per item: 18.90 €
25 piece(s) or more18.00 €Price per item: 18.00 €