Release agent Vormiol-EM3
Separating agent for metal and plastic formwork
for exposed concrete - ready to use
Pay attention to price reductions here!
VORMIOL-EM3 is a low-viscosity release agent for all unheated forms of shuttering.
It can be used in particular for metal and plastic formwork, but also for all other non-absorbent formwork. With VORMIOL-FLUID, exposed concrete surfaces of perfect quality can be produced. ,
Depending on the absorbency of the substrate 15 - 40 g / m². The required order quantity has to be determined on an individual basis.
VORMIOL-EM3 is delivered ready to use. The release agent should be applied with a suitable sprayer evenly thin, but covering on a clean and dry formwork.
The product is not a hazardous substance in the sense of the EC directives, dangerous goods regulations and transport regulations. The usual safety rules when handling chemicals are to be observed.
EC safety data sheet can be requested. ,
1 L bottle; 2 L canister; 5 L canisters and 10 L canisters.
VORMIOL-EM3 has a chemical-physical effect and has a very good release effect with a low application rate. The corrosion protection additives contained prevent rust formation on steel formwork.
Homogeneity homogeneous, color yellowish,
Effective ingredients highly refined mineral oils,
Density 0.81 ± 0.02 g / cm³
Processability from +1 ° C
Shelf life approx. 1 year
Storage In closed containers; cool, but frost-free.
Protect from strong sunlight.
PREVIEWS ARE ALWAYS REQUIRED!
The product is not a hazardous substance in the sense of the EC directives,
Hazardous substances regulation and transport regulations.
The usual safety rules when handling chemicals are to be observed.
EC safety data sheet can be requested.
Of course, you can also get larger quantities from us.
Please contact us.